The Silkland DP80 DisplayPort Cable review centers on a compact 1.6-foot cable built for high-bandwidth gaming and a tidy, close-range connection between a desktop and monitor.
Its 80Gbps DP 2.1 design targets demanding refresh rates, but the display and graphics hardware must also support the modes you want to use.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A 1.6-foot option for gamers building a compact DisplayPort 2.1 setup with compatible high-refresh monitors and graphics cards.
- VESA-certified DisplayPort 2.1 cable with an 80Gbps data-transfer rate and UHBR20 compatibility.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Includes VRR, FEC, ALLM, DSC 1.2a, and MST features; G-Sync and FreeSync support is also listed.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports HDR10+, HDCP 2.3, 3D, and uncompressed multichannel audio pass-through.
Pros
- High 80Gbps bandwidth and a broad range of listed resolution and refresh-rate combinations.
- VESA certification and compatibility with DP 2.0 and DP 1.4 support use across different generations of DisplayPort equipment.
Consider before buying
- At 1.6 feet, it works best when the PC and monitor sit close together; measure the actual routing path before buying.
- The highest listed modes depend on DSC and compatible equipment, so the cable alone cannot ensure a particular resolution or refresh rate.
Read the full review summary
This cable’s key appeal is its combination of VESA certification, DP 2.1 UHBR20 support, and a short run suited to a monitor placed close to a PC.
The description lists uncompressed support for 4K at up to 240Hz, 8K at up to 60Hz, and 2K at up to 540Hz, with higher listed modes available when Display Stream Compression (DSC) is enabled.
That gives buyers a range of potential configurations while making the distinction between compressed and uncompressed modes important.
It is best suited to a gaming desk where both endpoints have DisplayPort and the cable only needs to span a short distance.
Its no-latch connectors, nylon exterior, and shielding address practical installation and durability considerations; its brevity limits placement flexibility.
Check the monitor and graphics card specifications together, especially for UHBR20 and the particular resolution and refresh-rate combination you plan to run.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth ceiling
An 80Gbps DP 2.1 link is a strong fit for high-bandwidth display configurations when both connected devices support the target mode.
Resolution and refresh options
The listed range includes several high-refresh uncompressed modes and higher DSC-enabled maximums, giving compatible setups room to choose.
Gaming features
VRR, FEC, ALLM, DSC 1.2a, and MST are included in the feature set, with the result depending on device support.
Build and connector design
Triple shielding, tinned copper conductors, a nylon exterior, and no-latch plugs make a practical combination for a short desktop cable.
Setup flexibility
The 1.6-foot length keeps nearby equipment close, but offers little slack for a PC positioned farther from the display.
Device compatibility
It is designed for DisplayPort-equipped computers and monitors and is backward compatible with DP 2.0 and DP 1.4, though the endpoint capabilities govern performance.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with an 80Gbps data-transfer rate and UHBR20 compatibility.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Includes VRR, FEC, ALLM, DSC 1.2a, and MST features; G-Sync and FreeSync support is also listed.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports HDR10+, HDCP 2.3, 3D, and uncompressed multichannel audio pass-through.
- Male-to-male DisplayPort connectors have no latch. The cable uses 28 AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.
- Measures 1.6 feet and is intended for indoor connections between DisplayPort-equipped graphics devices and monitors.
- Silkland includes a 24-month service period and says technical support is available within 18 hours.
Pros and Cons of Silkland DP80 Cable
Pros
- High 80Gbps bandwidth and a broad range of listed resolution and refresh-rate combinations.
- VESA certification and compatibility with DP 2.0 and DP 1.4 support use across different generations of DisplayPort equipment.
- Gaming-focused features include VRR, FEC, ALLM, DSC, and MST.
- No-latch connectors simplify removal, while shielding and a nylon exterior suit a cable that may be routed or adjusted at a desk.
Consider before buying
- At 1.6 feet, it works best when the PC and monitor sit close together; measure the actual routing path before buying.
- The highest listed modes depend on DSC and compatible equipment, so the cable alone cannot ensure a particular resolution or refresh rate.
- It uses DisplayPort connectors at both ends, so it is not the choice for a setup that requires a different connection type.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 Cable if you are connecting a nearby gaming PC to a monitor and want a DP 2.1 cable with substantial bandwidth headroom.
The short length can help keep a compact desk connection contained without extra cable to coil or hide.
It is a particularly relevant option when your monitor and graphics card specifications list the same DisplayPort mode you intend to use.
Confirm whether the target is uncompressed or DSC-enabled, then check the required refresh rate, resolution, and port version on both devices.
The no-latch plug design may suit a setup where the cable is removed periodically or the port is awkward to reach. The stated 24-month service period is another useful consideration for buyers who value support after purchase.
Who should skip it
Skip this length if your PC is under the desk, on another side of the display, or needs a longer route around a monitor arm.
Measure from port to port along the intended path and allow room for gentle bends.
Look elsewhere if either device lacks a DisplayPort socket or if the precise mode you need is not supported by both endpoints.
For high-end resolutions and refresh rates, check the monitor and graphics-card specifications together rather than relying on the cable’s maximum figures alone.
How the Silkland DP80 Cable Fits a High-Refresh Setup
Bandwidth and display modes
An 80Gbps DP 2.1 cable is aimed at configurations that need more bandwidth than everyday monitor connections. The listed uncompressed combinations include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz.
DSC enables higher listed ceilings, including up to 4K at 540Hz and 8K at 240Hz.
These are maximums in the product description, not guarantees for every computer and monitor pairing; the graphics card, monitor, settings, and chosen mode all matter.
Gaming features depend on the system
VRR, FEC, ALLM, and DSC 1.2a speak to a gaming-oriented setup, while MST can support a multi-monitor configuration.
The cable also lists G-Sync and FreeSync compatibility, but those functions rely on matching support from the connected hardware and software.
If you plan to use multiple screens, confirm the capabilities and connection requirements for each display before settling on a layout.
A short run rewards careful measuring
At 1.6 feet, this is a purposefully short cable.
That can make sense when the tower sits beside or directly beneath the monitor, and the nylon exterior and triple shielding may be useful where the cable is routed through a compact desk space.
Measure the route rather than the straight-line distance: the cable needs enough reach to connect without being pulled taut.
Construction and everyday handling
The design pairs 28 AWG tinned copper conductors with triple shielding and gold-plated connectors. The plugs omit a latch, which removes the need to press a release tab when disconnecting.
These details describe the construction and handling choices; they do not replace checking that the cable is suitable for the specific ports and display mode in your setup.
Alternatives to Silkland DP80 Cable
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 when your setup is close-range and you need its higher bandwidth ceiling or listed modes.
The 10-foot model is the more practical fit when you need substantially more reach and its listed capabilities match your display requirements.
- This 10-foot cable has 54Gbps bandwidth and lists support for 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz.
- Its description also lists Dynamic HDR, HDCP 2.2, DSC 1.2a, G-Sync, FreeSync, and Adaptive-Sync.
- The DP80 is a 1.6-foot, 80Gbps cable with higher listed maximum bandwidth and several high-refresh modes, including uncompressed 4K at up to 240Hz.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a compact gaming setup that needs a short DisplayPort connection and has devices capable of using its high-bandwidth modes.
Its 80Gbps design, VESA certification, gaming features, and reinforced construction make a capable package on paper.
The main buying decision is fit: confirm your monitor and graphics card support the mode you want, including whether it uses DSC, and measure the route before choosing a 1.6-foot cable.
If those checks line up, the DP80 is a sensible option for a close PC-to-monitor connection.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A 1.6-foot option for gamers building a compact DisplayPort 2.1 setup with compatible high-refresh monitors and graphics cards.
- VESA-certified DisplayPort 2.1 cable with an 80Gbps data-transfer rate and UHBR20 compatibility.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; DSC-enabled modes reach up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
- Includes VRR, FEC, ALLM, DSC 1.2a, and MST features; G-Sync and FreeSync support is also listed.
- Backward compatible with DisplayPort 2.0 and 1.4, and supports HDR10+, HDCP 2.3, 3D, and uncompressed multichannel audio pass-through.