The SMALLRIG Adjustable Camera Monitor Mount review centers on a compact way to position a field monitor on a cage, top handle, or compatible support.
Its locating interfaces, broad pan and tilt adjustment, and support for portrait or landscape installation make it especially relevant to camera operators building a flexible rig.
SMALLRIG Monitor Mount Review Summary
The quick verdict

800+ ratings
Read Amazon ReviewsSMALLRIG 6314 Monitor Mount
A compact adjustable monitor mount for camera rigs that need portrait or landscape positioning and an anti-twist connection.
- Model 6314 is intended to mount camera monitors or other accessories to a camera cage, top handle, or another support accessory.
- The top connection uses a retractable 1/4-inch-20 locating screw and locating pins, with a silicone pad to help protect the monitor surface.
- A 3/8-inch-16 locating screw at the bottom is designed to connect with an ARRI locating hole.
- The mount supports 360-degree panning and 180-degree tilting, including horizontal and vertical monitor arrangements.
Pros
- Dual locating interfaces offer anti-twist engagement at the support and monitor connections.
- Wide pan and tilt adjustment accommodates different viewing positions and portrait-oriented shooting.
Consider before buying
- The top connection is tailored to 1/4-inch-20 threaded holes or locating holes, so check the monitor interface before purchase.
- No maximum supported load is specified, so buyers should confirm suitability for their monitor and rig arrangement.
Read the full review summary
The 6314 combines a 3/8-inch-16 ARRI locating screw at the base with a retractable 1/4-inch-20 locating screw at the top.
The upper pins and silicone pad are intended to help limit monitor twisting and surface scratches, while the thumb knob allows hand tightening and the included L-shaped Allen wrench provides additional tightening.
With 360-degree pan and 180-degree tilt, it can accommodate both horizontal and vertical monitor orientations while retaining tilt adjustment.
At 75.6 grams, it adds little stated weight to a rig; the key fit check is whether your monitor and support offer the matching 1/4-inch-20 mounting interface or locating hole.
No load rating is provided, so heavier or unusually shaped monitors merit careful compatibility checking.
The buying factors
SMALLRIG Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
The 360-degree pan and 180-degree tilt range offer considerable flexibility for framing a monitor.
Anti-twist design
Locating features at both ends, plus a silicone pad on top, address rotation and contact protection.
Mounting flexibility
The base ARRI locating screw and retractable upper 1/4-inch-20 locating screw cover a useful set of rig connections.
Portrait orientation support
The mount supports vertical as well as horizontal installation and retains tilt adjustment in vertical use.
Adjustment convenience
A thumb-adjustable knob supports hand operation, with an Allen wrench included for additional tightening.
Load guidance
The design is feature-rich, but no supported device weight is specified, making payload fit harder to judge in advance.
Key Features and Specifications of SMALLRIG Monitor Mount
- Model 6314 is intended to mount camera monitors or other accessories to a camera cage, top handle, or another support accessory.
- The top connection uses a retractable 1/4-inch-20 locating screw and locating pins, with a silicone pad to help protect the monitor surface.
- A 3/8-inch-16 locating screw at the bottom is designed to connect with an ARRI locating hole.
- The mount supports 360-degree panning and 180-degree tilting, including horizontal and vertical monitor arrangements.
- Tilt damping can be adjusted with a thumb knob; an L-shaped Allen wrench is included for extra tightening.
- The structure uses black anodized aluminum alloy and stainless steel and weighs 75.6 grams.
Pros and Cons of SMALLRIG Monitor Mount
Pros
- Dual locating interfaces offer anti-twist engagement at the support and monitor connections.
- Wide pan and tilt adjustment accommodates different viewing positions and portrait-oriented shooting.
- Thumb adjustment and an included wrench provide both quick hand positioning and a way to tighten further.
- The stated 75.6-gram weight keeps the mount itself relatively light in a camera setup.
Consider before buying
- The top connection is tailored to 1/4-inch-20 threaded holes or locating holes, so check the monitor interface before purchase.
- No maximum supported load is specified, so buyers should confirm suitability for their monitor and rig arrangement.
- The base relies on a 3/8-inch-16 ARRI locating hole for its intended anti-twist connection; confirm your support has the matching interface.
Who Should Buy SMALLRIG Monitor Mount?
Good fit
Consider the 6314 if your camera cage or handle has a 3/8-inch-16 ARRI locating hole and your monitor accepts the upper 1/4-inch-20 locating connection.
The locating features are useful when you want a monitor to stay oriented as you reposition the rig, and the pan and tilt range gives room to adjust the viewing angle for different shooting positions.
It also suits operators who switch between landscape and portrait framing. The mount is described as retaining tilt adjustment in vertical installation, so you can orient the monitor for vertical shooting while still adjusting its viewing angle.
Its low stated weight may appeal when keeping a rig compact matters.
Before ordering, compare both connection points with your exact equipment and consider the monitor's weight and shape.
The mount has no published load figure in its description, so particularly heavy monitors or setups exposed to frequent movement deserve a deliberate fit check.
The hand knob is convenient for positioning, while the included wrench is available when you want additional tightening.
Who should skip it
Look elsewhere if your rig lacks the specified 3/8-inch-16 ARRI locating hole and you need a mount that attaches directly without an appropriate adapter.
Verify the full connection path before relying on an adapter to preserve the intended anti-twist setup.
This is also a less straightforward choice when you need a clearly stated payload rating to match a heavy monitor. Check the monitor's weight and your support configuration against guidance from the manufacturer before committing.
How the SMALLRIG Monitor Mount fits a camera rig
Connection details matter
The 6314 is designed around specific interfaces at each end: a 3/8-inch-16 ARRI locating screw below and a retractable 1/4-inch-20 locating screw above.
Those locating points are central to its anti-twist approach, so compatibility depends on the actual holes available on both the support and monitor. A standard thread match alone may not provide the same locating engagement.
Adjustment for changing compositions
A full 360-degree pan and 180-degree tilt range gives operators room to reposition the display without changing the camera's own orientation. This is useful when the monitor needs to face the operator from a side or elevated position.
Vertical installation adds a portrait-oriented option, and the description says tilt adjustment remains available in that arrangement.
Tension and practical setup
The thumb knob adjusts tilt damping, offering a way to tune resistance for a connected device. The included Allen wrench provides additional tightening, a useful option when a hand-tightened connection needs more security.
Since no supported weight limit is given, judge the complete setup carefully rather than assuming the mount will suit every monitor.
A light part with a defined job
At 75.6 grams, the mount adds modest stated weight and is made from anodized aluminum alloy and stainless steel. Its role is focused: it positions a monitor or compatible accessory between a camera support and the display.
Buyers seeking a clamp or an extended arm should make sure this compact mounting format matches their rig layout.
Alternatives to SMALLRIG Monitor Mount
Camera Mounts & Clamps alternative

2,000+ ratings
Read Amazon ReviewsSMALLRIG 2905B Field Monitor Mount
Choose the 2905B if your cage or handle offers a cold shoe and your monitor is in its specified 5- or 7-inch range.
The 6314 is the more relevant fit when your support has the matching ARRI locating hole and portrait installation matters.
- The 2905B attaches through a cold shoe at the bottom, supports 5-inch and 7-inch monitors, and uses a 1/4-inch-20 top screw.
- It offers 180-degree tilt and 360-degree swivel with thumb-adjustable tilt tension.
- The 6314 uses a 3/8-inch-16 ARRI locating screw at the bottom and supports horizontal or vertical monitor installation.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSMALLRIG 2732 Magic Arm Clamp Kit
Consider the 2732 when you need to attach gear to a rod, tube, table, or another clamping surface and want more reach from an articulated arm.
The 6314 is a more direct monitor-mount choice for a compatible camera cage or handle, particularly if portrait orientation and its locating connections suit your rig.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm.
- Its clamp opens from 15 mm to 54 mm, and the arm has 1/4-inch screws at both ends with double 360-degree ball-head adjustment.
- The 6314 mounts between compatible 1/4-inch-20 and 3/8-inch-16 locating interfaces and focuses on monitor positioning at the rig.
Is SMALLRIG Monitor Mount Worth It?
The SMALLRIG 6314 is worth considering for a camera rig that matches its ARRI locating base and 1/4-inch-20 monitor connection.
Broad pan and tilt adjustment, portrait installation, locating features at both ends, and a light stated weight give it a useful set of monitor-positioning options.
Confirm the mounting interfaces and consider your monitor's weight before buying, since the description does not give a payload rating.
If those fit checks work for your setup, the 6314 offers a compact, adjustable route to placing a monitor where you can see it while shooting.
Your review at a glance

800+ ratings
Read Amazon ReviewsSMALLRIG 6314 Monitor Mount
A compact adjustable monitor mount for camera rigs that need portrait or landscape positioning and an anti-twist connection.
- Model 6314 is intended to mount camera monitors or other accessories to a camera cage, top handle, or another support accessory.
- The top connection uses a retractable 1/4-inch-20 locating screw and locating pins, with a silicone pad to help protect the monitor surface.
- A 3/8-inch-16 locating screw at the bottom is designed to connect with an ARRI locating hole.
- The mount supports 360-degree panning and 180-degree tilting, including horizontal and vertical monitor arrangements.