The SmallRig Cage Kit review centers on a camera-specific rigging upgrade for Sony A6700 owners who want to add accessories and keep an HDMI cable secured during video work.
Its integrated Arca-Swiss quick-release plate and grip-oriented design make it most appealing to creators who move between handheld shooting and supported setups.
SmallRig A6700 Cage Review Summary
The quick verdict

800+ ratings
Read Amazon ReviewsSmallRig Cage Kit 4336 for Sony A6700
A compact cage kit for Sony A6700 owners who want a more secure grip, HDMI cable support, and mounting points for video accessories.
- Designed for the Sony A6700 and secured with a 1/4"-20 screw and an M2.5 screw.
- Includes an HDMI cable clamp intended to secure the connection and protect the camera port.
- Provides 1/4"-20 and 3/8"-16 threaded holes, a 3/8"-16 top locating hole, and a cold shoe for accessories.
- Built-in Arca-Swiss quick-release plate is designed for tripod changes and DJI RS 2, RSC 2, RS 3, and RS 3 Pro setups.
Pros
- A camera-specific fit and two-point locking arrangement give the cage a defined place on an A6700 rig.
- A useful range of threaded mounts and a cold shoe can accommodate common video accessories.
Consider before buying
- Using the camera's headphone jack requires removing the HDMI cable clamp, which may interrupt a setup that needs both connections.
- Installation requires removing the camera's right-side strap ring, so strap users should consider how that affects their preferred carry arrangement.
Read the full review summary
The SmallRig Cage Kit 4336 combines a fitted camera cage, an HDMI cable clamp, multiple threaded accessory points, and a built-in Arca-Swiss plate.
SmallRig says the cage locks to the camera with 1/4"-20 and M2.5 screws, while retaining access to ports, controls, and the battery door.
The additional hinge arm at the battery door is intended to follow the camera's shape and improve the grip.
This is a focused fit for A6700 users building a video rig with a microphone, light, monitor, or handle.
The cage weighs 152 g, so it adds a modest amount of hardware, and the integrated plate is designed to simplify transitions among compatible tripods and DJI RS 2, RSC 2, RS 3, and RS 3 Pro setups.
Check your planned accessories and connection routine before buying: the headphone jack requires removing the HDMI clamp first, and installation requires removing the camera's right-side strap ring.
The buying factors
SmallRig A6700 Cage Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
A6700 fit
Designed specifically for the Sony A6700 and secured at two points, with camera access retained.
Accessory expansion
Offers 1/4"-20 and 3/8"-16 threads, a 3/8"-16 top locating hole, and a cold shoe.
Cable management
The included HDMI clamp is intended to protect the port and secure the cable, with a headphone-jack tradeoff.
Grip design
The shaped cage and battery-door hinge arm are designed to improve handling comfort.
Rig transitions
An integrated Arca-Swiss plate supports quick changes among compatible tripod and DJI RS setups.
Setup flexibility
Supports several mounting approaches, but headphone use requires removing the HDMI clamp.
Key Features and Specifications of SmallRig A6700 Cage
- Designed for the Sony A6700 and secured with a 1/4"-20 screw and an M2.5 screw.
- Includes an HDMI cable clamp intended to secure the connection and protect the camera port.
- Provides 1/4"-20 and 3/8"-16 threaded holes, a 3/8"-16 top locating hole, and a cold shoe for accessories.
- Built-in Arca-Swiss quick-release plate is designed for tripod changes and DJI RS 2, RSC 2, RS 3, and RS 3 Pro setups.
- Shaped cage with an additional hinge arm at the battery door; access to ports, controls, and the battery door is retained.
- Weighs 152 g and measures 2.45 × 3.58 × 2.45 inches, according to the supplied dimensions.
Pros and Cons of SmallRig A6700 Cage
Pros
- A camera-specific fit and two-point locking arrangement give the cage a defined place on an A6700 rig.
- A useful range of threaded mounts and a cold shoe can accommodate common video accessories.
- The included HDMI clamp and built-in quick-release plate address cable handling and rig changes in one kit.
- The grip contour and battery-door hinge arm are designed around handheld comfort and battery access.
Consider before buying
- Using the camera's headphone jack requires removing the HDMI cable clamp, which may interrupt a setup that needs both connections.
- Installation requires removing the camera's right-side strap ring, so strap users should consider how that affects their preferred carry arrangement.
- The Arca-Swiss plate's convenience depends on the tripod or support system being compatible with that interface.
Who Should Buy SmallRig A6700 Cage?
Good fit
Consider this cage if you own a Sony A6700 and want to build a video setup around several accessories.
The mix of 1/4"-20 and 3/8"-16 holes, a locating hole, and a cold shoe gives you several attachment routes for handles, arms, microphones, and lights.
Its fitted shape and two fasteners also make it more purposeful than a generic mounting plate when you want a protective framework around the camera.
The HDMI clamp and integrated Arca-Swiss plate are especially relevant if your routine includes a wired monitor or other HDMI accessory and frequent changes between handheld work and compatible supports.
Before committing, map out your cable connections and check that removing the right-side strap ring suits your carry method.
If you regularly monitor audio through the headphone jack, factor in the extra step of taking off the HDMI clamp.
Who should skip it
Skip it if you need to use the headphone jack while keeping the HDMI clamp installed; the described setup requires removing that clamp for headphone access.
It is also a poor fit if you need a universal cage for several camera bodies or rely on a strap attached to the A6700's right-side ring without changing your setup.
How the SmallRig A6700 Cage Fits a Video Rig
Accessory mounting for a growing setup
The cage's mounting mix gives you room to build incrementally. The 1/4"-20 and 3/8"-16 threaded holes support compatible accessories, while the 3/8"-16 top locating hole and cold shoe offer additional mounting positions.
Consider the size and placement of the accessories you plan to use so they do not crowd the controls or one another; the product description does not specify a universal accessory arrangement.
HDMI security and audio access
A dedicated clamp can help keep an HDMI cable anchored at the camera during video work, reducing the chance that movement at the cable connection becomes a distraction.
The tradeoff is practical: the headphone jack requires the HDMI clamp to be removed first.
If audio monitoring is part of your regular workflow, decide whether that exchange is acceptable before building the rest of the rig around the cage.
Grip and camera access
The shaped housing and added hinge arm at the battery door are intended to improve the feel of the grip.
SmallRig also describes access to ports, controls, and the battery door, which matters when a cage stays on the camera between takes.
The supplied installation note calls for removing the right-side strap ring, so account for that change if your strap normally attaches there.
Quick changes between supports
The integrated Arca-Swiss plate is meant to reduce setup friction when moving between compatible tripods, stabilizers, and handheld shooting.
The listed DJI RS 2, RSC 2, RS 3, and RS 3 Pro modes give buyers a concrete compatibility starting point, but you should still confirm that your specific mounting arrangement uses the same interface and leaves the needed clearance.
Alternatives to SmallRig A6700 Cage
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Cage for Sony A6400/A6100/A6300/A6500
Choose the 4336 for an A6700-centered rig that benefits from its included HDMI clamp and integrated quick-release plate.
The older-model cage is the more relevant fit if your camera is one of its listed bodies; it is not a substitute for an A6700-specific cage.
- This SmallRig cage is designed for the Sony A6400, A6100, A6300, and A6500, with 1/4" and 3/8" mounting holes, 3/8" locating holes, and a built-in flat screwdriver.
- An HDMI cable clamp is optional rather than included.
- The SmallRig Cage Kit 4336 is made for the Sony A6700 and includes an HDMI clamp, an Arca-Swiss plate, and several accessory mounting points.
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount 1138
The 4336 is the direct choice for building out and protecting an A6700 camera rig. The 1138 suits a different need: positioning compatible equipment on an external mounting surface, rather than adding a fitted cage to the camera.
- The SmallRig 1138 is a separate clamp and double-ball-head mount for attaching compatible cameras, monitors, lights, microphones, or action cameras to a rod, tube, table, frame, or tripod.
- Its stated support capacity is up to 1.5 kg.
- The SmallRig Cage Kit 4336 attaches to the A6700 and provides mounting points around the camera, along with a cable clamp and an integrated Arca-Swiss plate.
Is SmallRig A6700 Cage Worth It?
The SmallRig Cage Kit 4336 is worth considering for Sony A6700 owners who want a camera-specific mounting platform, a shaped grip, HDMI cable support, and an integrated Arca-Swiss plate.
Its combination of attachment points makes it a useful base for a video rig that may move between handheld and compatible supported setups.
Buy if the A6700 fit and accessory layout match your setup, and you can work around the headphone-jack limitation and right-side strap-ring removal. Confirm your support system's Arca-Swiss compatibility before relying on the quick-release plate.
Your review at a glance

800+ ratings
Read Amazon ReviewsSmallRig Cage Kit 4336 for Sony A6700
A compact cage kit for Sony A6700 owners who want a more secure grip, HDMI cable support, and mounting points for video accessories.
- Designed for the Sony A6700 and secured with a 1/4"-20 screw and an M2.5 screw.
- Includes an HDMI cable clamp intended to secure the connection and protect the camera port.
- Provides 1/4"-20 and 3/8"-16 threaded holes, a 3/8"-16 top locating hole, and a cold shoe for accessories.
- Built-in Arca-Swiss quick-release plate is designed for tripod changes and DJI RS 2, RSC 2, RS 3, and RS 3 Pro setups.