The SmallRig Field Monitor Mount Holder review centers on a compact mount for adding a 5- or 7-inch monitor to a camera cage or handle.
Its cold shoe base and adjustable tilt and swivel suit rigs where monitor position needs to change during setup.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera-rig users who want adjustable viewing angles and a cold shoe connection for a 5- or 7-inch monitor.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle using its cold shoe base.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for changing monitor orientation and viewing angle.
- Tilt tension adjusts quickly with a thumbscrew; swivel tension is adjusted with the provided Allen wrench.
- The top has locating pins and a silicone pad to help secure compatible monitors and reduce surface scratching or twisting.
Pros
- Pairs a cold shoe connection with a threaded mounting option at the base.
- Offers wide tilt and swivel adjustment for framing a monitor around a camera rig.
Consider before buying
- The swivel tension requires the included Allen wrench, so adjustment is less immediate than tilt adjustment.
- Load capacity changes with tilt angle; buyers should check the limit for their intended position and monitor.
Read the full review summary
The mount combines a cold shoe adapter with a top 1/4-inch screw, a threaded hole at the base, and adjustable positioning.
Tilt can move through 180 degrees, while the mount swivels 360 degrees; the tilt tension adjusts by thumbscrew, and swivel tension uses the included Allen wrench.
Its locating pins and silicone pad are intended to help secure compatible monitors and protect their surfaces.
This design is best suited to a compact camera rig with a 5- or 7-inch monitor, especially when angle adjustment and a direct cold shoe connection matter.
The load capacity varies with tilt angle, so buyers should match their setup to the stated limits.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
Offers up to 180-degree tilt and 360-degree swivel for positioning the monitor.
Mounting options
Combines a cold shoe base with a 1/4-inch threaded hole and a top 1/4-inch screw.
Monitor fit
Designed for 5- and 7-inch monitors, with locating pins and a silicone pad.
Tension control
Tilt tension adjusts with a thumbscrew; swivel tension is adjusted using the included Allen wrench.
Load guidance
Provides different load limits for several tilt angles, giving buyers useful setup-specific guidance.
Compactness
Weighs 76 grams and folds to 78 by 67 by 42 millimeters.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle using its cold shoe base.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for changing monitor orientation and viewing angle.
- Tilt tension adjusts quickly with a thumbscrew; swivel tension is adjusted with the provided Allen wrench.
- The top has locating pins and a silicone pad to help secure compatible monitors and reduce surface scratching or twisting.
- A 1/4-inch screw on top supports a monitor, microphone, light, or other compatible accessory.
- The base includes a 1/4-inch-20 threaded hole for attachment to a magic arm or stabilizer.
- The stated load limits vary by tilt: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees. The 1/4-inch knurled screw should be retightened with the Allen wrench for additional security.
Pros and Cons of SmallRig Monitor Mount
Pros
- Pairs a cold shoe connection with a threaded mounting option at the base.
- Offers wide tilt and swivel adjustment for framing a monitor around a camera rig.
- Uses a thumbscrew to adjust tilt tension without needing the Allen wrench for that adjustment.
- Locating pins and a silicone pad add contact points for compatible monitors.
Consider before buying
- The swivel tension requires the included Allen wrench, so adjustment is less immediate than tilt adjustment.
- Load capacity changes with tilt angle; buyers should check the limit for their intended position and monitor.
- The screw should be retightened with the Allen wrench for additional security, adding a setup step.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider this mount if your rig has a cold shoe and you want to position a 5- or 7-inch monitor without adding a longer articulated arm.
Its 180-degree tilt and 360-degree swivel provide flexibility to aim the display, while the thumbscrew makes tilt tension convenient to adjust during setup.
It also makes sense when you want the option of using a 1/4-inch-20 threaded connection at the base.
Before choosing it, compare your monitor and intended tilt position with the angle-specific load limits, and confirm that the cold shoe or threaded connection matches your rig.
Who should skip it
Look elsewhere if your setup requires a longer reach from the camera or a clamp that attaches to a rod, tube, or table; this holder is designed around a cold shoe base and a compact mounting point.
It may not suit a workflow that needs tool-free adjustment of every joint. Tilt tension uses a thumbscrew, but swivel tension is adjusted with the Allen wrench.
SmallRig Monitor Mount: Fit, Adjustment, and Load
Cold shoe and threaded mounting
The base gives the mount two connection paths: a cold shoe adapter for a cage or handle, and a 1/4-inch-20 threaded hole for compatible accessories such as a magic arm or stabilizer.
That flexibility can simplify matching the holder to a rig, provided the chosen support has the right interface.
Positioning the monitor
The 180-degree tilt and 360-degree swivel let the user orient the display around the camera rather than fixing it at one angle.
This range is useful when the operator changes shooting position, though the compact holder does not provide the extended reach of an arm.
Tension and load limits
Tilt tension uses a thumbscrew, while swivel tension is adjusted with the included Allen wrench.
The specified capacity depends on tilt angle, so check the limit for the position you intend to use and retighten the 1/4-inch knurled screw with the wrench as directed.
Monitor contact points
Locating pins on top are designed to help secure compatible monitor models such as the Ninja V and V+, and the silicone pad helps protect against scratching and twisting.
Buyers should make sure their monitor's mounting surface aligns with the pins and screw before building the rest of the rig around it.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Monitor Mount 6313
Choose the Field Monitor Mount Holder if you want its stated 5- and 7-inch monitor fit and the base's threaded-hole option. Consider the 6313 if portrait mounting and a retractable locating screw are more relevant to your rig.
- The 6313 also offers 180-degree tilt and 360-degree pan, with a thumb-adjustable tilt damping knob.
- Its description highlights landscape and portrait monitor installation, a retractable 1/4-inch-20 locating screw, and a 71.7-gram weight.
- The Field Monitor Mount Holder supports 5- and 7-inch monitors, has a cold shoe base plus a 1/4-inch-20 threaded hole, and specifies angle-dependent load limits.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 5.5-Inch Articulating Magic Arm
Choose the holder for a direct cold shoe attachment and its dedicated tilt-and-swivel adjustment.
The 5.5-inch arm is a better fit when you need more distance between the support and monitor and can connect both ends through 1/4-inch threads.
- This 5.5-inch articulating arm has 1/4-inch screws at both ends and double 360-degree ball heads.
- It is described for monitors and lights, with a rubber cushion ring and a best weight load of 1.5 kilograms.
- The Field Monitor Mount Holder is a compact cold shoe mount with a top 1/4-inch screw and specified tilt-angle load limits.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact rig that needs adjustable monitor positioning through a cold shoe or compatible threaded connection.
Its tilt thumbscrew, broad swivel range, and monitor contact features make the design versatile for 5- and 7-inch displays.
Check your monitor's mounting interface and the angle-specific load limit before buying.
Also account for the Allen wrench adjustment at the swivel and the recommended screw retightening; buyers needing extended reach or fully tool-free adjustment should consider a different mounting style.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera-rig users who want adjustable viewing angles and a cold shoe connection for a 5- or 7-inch monitor.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle using its cold shoe base.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for changing monitor orientation and viewing angle.
- Tilt tension adjusts quickly with a thumbscrew; swivel tension is adjusted with the provided Allen wrench.
- The top has locating pins and a silicone pad to help secure compatible monitors and reduce surface scratching or twisting.