The SmallRig Super Clamp is a compact mounting point for camera accessories when a tripod or fixed rig is not the right fit.
This SmallRig Super Clamp review looks at its adjustable jaw, threaded attachment points, and the practical limits buyers should check before choosing a mounting location.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A versatile clamp for creators who want to attach compatible camera accessories to narrow bars, shelves, and other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to about 15 mm; the intended mounting surface should fall within that range.
- Threaded holes in 1/4-inch and 3/8-inch sizes accommodate compatible accessories, including ballheads and magic arms.
- The clamp is designed for mounting on suitable objects such as hooks, shelves, plate glass, crossbars, and other clamps.
- Construction combines aluminum alloy and stainless steel.
Pros
- Offers two common thread sizes for attaching compatible camera accessories.
- A broad range of potential mounting surfaces makes it useful beyond a conventional tripod setup.
Consider before buying
- The jaw range limits suitable mounting points to roughly 15–40 mm thick.
- The clamp is the only included item, so a compatible ballhead, arm, or other accessory may be needed to position gear.
Read the full review summary
This clamp combines an adjustable jaw with 1/4-inch and 3/8-inch threaded holes, making it useful for building a simple mounting point around a set, desk, or other suitable surface.
Its aluminum alloy and stainless steel construction, plus rubber pads on the clamping parts, give it a straightforward design for supporting small camera accessories.
It suits photographers and video creators who already have compatible accessories and want more flexibility in where those accessories sit.
The key fit check is the surface: the jaw range is about 15–40 mm, so measure the intended mounting point and consider its shape and stability before relying on it.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is designed for varied mounting points, and its 1/4-inch and 3/8-inch threads support attaching compatible accessories.
Jaw range
The approximately 15–40 mm opening accommodates many narrow supports, though it rules out surfaces beyond that range.
Accessory compatibility
Two common thread sizes broaden its usefulness, but buyers should confirm that their accessory has a matching connection.
Contact protection
Rubber pads are intended to reduce slipping and scratching where the clamp meets the mounting surface.
Portability
At about 130 g and described as compact, it is a modest addition to a camera kit.
Load guidance
The product data gives a maximum recommended load of 3.3 pounds, a useful reference that still calls for checking the complete setup and mounting point.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm and closes to about 15 mm; the intended mounting surface should fall within that range.
- Threaded holes in 1/4-inch and 3/8-inch sizes accommodate compatible accessories, including ballheads and magic arms.
- The clamp is designed for mounting on suitable objects such as hooks, shelves, plate glass, crossbars, and other clamps.
- Construction combines aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- The clamp weighs about 0.13 kg, and the maximum recommended load is 3.3 pounds.
Pros and Cons of SmallRig Super Clamp
Pros
- Offers two common thread sizes for attaching compatible camera accessories.
- A broad range of potential mounting surfaces makes it useful beyond a conventional tripod setup.
- Rubber contact pads add a layer between the clamp and the surface.
- Compact, lightweight construction is convenient for a portable kit.
Consider before buying
- The jaw range limits suitable mounting points to roughly 15–40 mm thick.
- The clamp is the only included item, so a compatible ballhead, arm, or other accessory may be needed to position gear.
- The 3.3-pound maximum recommendation calls for care with heavier or extended setups; check the total load and leverage before mounting.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider it if you need a small mounting base for a camera accessory and regularly work around bars, shelves, or other stable surfaces.
The two threaded sizes give you options when matching the clamp to compatible gear, while the adjustable jaw helps it adapt to different mounting points within its range.
Before buying, measure the spot where you plan to attach it and check the accessory’s thread.
Also think about the complete setup: an extended arm can place more leverage on a clamp than a compact accessory mounted close to it, so keep the recommended load and the stability of the support in view.
Who should skip it
Choose another mounting approach if your intended surface is thinner than about 15 mm or thicker than about 40 mm, or if you need a complete articulated arm in the same package.
It is not a suitable pick when your accessory setup exceeds the stated maximum recommended load. Check the weight and how far the gear will extend from the mounting point before committing.
How the SmallRig Super Clamp Fits a Camera Rig
Measure the mounting point first
The jaw’s approximate 15–40 mm range is the most important fit constraint. Measure the actual bar, shelf edge, or other support where the clamp will sit, and check whether its shape gives the pads a stable contact area.
Plan the accessory connection
The 1/4-inch and 3/8-inch threaded holes let the clamp serve as a base for compatible accessories.
Confirm the thread size and the connection arrangement of the item you want to attach; the clamp itself does not include a ballhead or arm.
Keep the whole setup in mind
The maximum recommended load is 3.3 pounds, but the support surface and accessory position also matter.
A heavier or more extended arrangement can put additional leverage on the mounting point, so consider the full configuration rather than the accessory’s weight alone.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Consider this option if you want a clamp-and-ball-head arrangement with an included action camera adapter. The main clamp is the simpler choice when you already have a compatible accessory to attach through its threaded holes.
- This model combines a clamp with a double ball head and includes an action camera mount adapter. Its listed maximum supported weight is 1.5 kg.
- The SmallRig Super Clamp provides an adjustable jaw and threaded holes, while leaving accessory positioning to a separately compatible attachment.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Pick the kit if you need an included arm to position an accessory away from the mounting point or need the wider stated jaw opening.
The main clamp may fit better when a compact clamp is all you need and your existing accessory connects directly.
- This kit includes a super clamp and a 9.8-inch articulating arm with 1/4-inch screws at both ends.
- Its clamp jaw opens to a maximum of 54 mm and a minimum of 15 mm.
- The SmallRig Super Clamp is a compact clamp with two thread sizes, and no articulating arm is included.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering as a compact, adaptable base for compatible camera accessories.
Its dual thread sizes, adjustable jaw, and rubber pads make it useful for setups that need a mounting point away from a tripod.
Check the mounting surface against the 15–40 mm jaw range, verify the accessory connection, and keep the complete rig within the 3.3-pound maximum recommendation. If you need an included articulated arm, a clamp-and-arm kit may suit you better.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A versatile clamp for creators who want to attach compatible camera accessories to narrow bars, shelves, and other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to about 15 mm; the intended mounting surface should fall within that range.
- Threaded holes in 1/4-inch and 3/8-inch sizes accommodate compatible accessories, including ballheads and magic arms.
- The clamp is designed for mounting on suitable objects such as hooks, shelves, plate glass, crossbars, and other clamps.
- Construction combines aluminum alloy and stainless steel.